If you recall way back in this post I replaced the Van’s HS-810-1 reinforcing angle with a larger piece of angle (same dimensions as the lower HS-814-1 angle) as part of the F1 Modifications.
Tonight I worked to taper this new angle (this would be F1 Rocket part number HS-014).
I started off by cutting close to the line with a hack saw.
I then used a mixture of filing and the 3M Scotchbrite wheel to take the excess material off down to the line and round off the ends (making sure I kept my min. edge distance).
Please comment, I love to hear from my readers. Thanks again for coming along for this ride, you make my work worthwhile.
Leave a Reply