An exciting day today as I’m finally able to start riveting the ailerons together! I started with the spar, and getting the end doubler plate and nutplate riveted. Next I started to assemble the leading edge assembly, and this is done by first getting the leading edge end ribs fastened to the balance weight pipe. […]
Aileron assembly – Pt. 3 – Lightening holes
Now that the aileron assembly is pretty much put together, I now need to focus on the aileron spars which still have a bit of work outstanding. What I need to do now is to dimple the spar caps, and also to cut out the lightening holes that run the length of the spar. I […]
Aileron assembly – Pt. 2
Continuing with the building up of the ailerons, I’m starting out today by trimming the aileron skin, as the ailerons on the F1 Rocket are 48 inches in length and are trimmed on the inboard side. Here is a closer look at the trim line. 48 inches is the final dimension, and for now, I’m […]
Aileron assembly Pt. 1
The next project I’m moving forward with is going to be assembling the flaps and ailerons. I’m tackling this now, mostly to assemble some of the loose pieces that have been sitting around the shop for the last little bit and I’m eager to get these into an assembly to only have to move one […]