F1 Rocket Hangar

Speed...Speed and Looks...Looks and Speed!

  • The Airplane Builder
  • F1 Rocket Info
    • F1 Rocket Specs
    • F1 Rocket Build Tips
  • F1 Build Log
  • About
    • Disclosure
  • Stewart 51 Hangar
  • Resources
  • Ask Mike | Contact

Main Spar Riveting – Right Wing

October 29, 2020 by admin Leave a Comment

Today I began the main spar riveting on the right-wing. I started at the forward wing spar doubler splice plate. This riveting was straightforward. This next picture is the first few rivets set. The next picture shows the splice plate has the riveting completed. The next step was to rivet the spar web spacer blocks […]

Left Wing Construction Begins!

March 18, 2020 by admin Leave a Comment

While I’m still awaiting my new rivet sets that I need to complete riveting the horizontal stabilizer, I thought that now would be a good time to get started on construction of the wings. Before beginning on this task, if you’re considering this route, there are a few things you will need before starting out. […]

Wing Spar Orientation

March 13, 2020 by admin 2 Comments

Today, I got the wing spars out on the workbench and I started to identify the orientation (upper/lower/fore/aft). As the wing spars were built in the Van’s factory jigs, all the holes are predrilled and some are even reamed for close tolerance bolts. Since the spar has comes with all this work accomplished, each piece […]

Profile Photo 1 Hello - My name is Mike and I'm a true believer that if you can imagine something, it's just a matter of bringing it into reality.

Categories

  • Empennage
    • Elevators
      • Left Elevator
        • Trim Tab
      • Right Elevator
    • Horizontal Stabilizer
    • Rudder
    • Vertical Fin
  • In My Travels
  • Tools
  • Uncategorized
  • Wings
    • Ailerons
    • F-404 Bulkhead
    • Flaps
    • Left Wing
    • Rear Wing Spar
  • Workshop

Tags

Ailerons Countersink Dimpling Doubler E-606-PP Elevator Empennage F-404 Bulkhead Flaps Horizontal Stabilizer HS-708 HS-3101 HS-3201 Layout Little Bit Main Squeeze Mods Other Rockets priming rear spar Rib spacing Riveting Rudder Rudder Brace Horn Screw-ups spacer blocks Spar spreader bars Stiffener Template Tools TrimTab Unboxing Vertical Fin VS-001 VS-002 VS-803PP VS-808PP W-407B W-407C W-407D Wayne Hadath Wing Wings Workshop

Copyright © 2023 · Beautiful Pro Theme on Genesis Framework · WordPress · Log in