Today I spent some time working on the rudder. This is one of the F1 Rocket mods needed to strengthen the standard RV-8 rudder. The mod is to add a beefy aluminum angle which is made from 6061-T6, 1 1/2 inch by 2 inch angle, 0.125 inch thick. Here is a diagram of the stiffener […]
Rudder Frame Trial Assembly
This evening I was able to begin the assembly of the rudder structural frame. I began by fitting the Rudder Horn (R-405PD) onto the rudder spar and bottom rib. Here is a picture as viewed from the bottom. Once you have the Rudder Horn Brace (R-710) in place, you will want to mark […]