Another F1 Rocket modification to be accomplished is adding additional reinforcing plates to the vertical fin spar hinge attach points (in the top and mid locations). The additional plate at the upper fin location is made from 2024-T3, 0.063″ material and trimmed to be large enough to pick up all the rivet holes of the […]
Rudder Hinge Reinforcing Plates
Today I began to work on one of the F1 Rocket mods that are needed on the standard RV-8 tail kit, which are to add additional reinforcing plates. These plates are the same as the ones supplied with the kit, and for these I managed to get some of these extra parts off my buddy Garet as he had some […]
Vertical Fin – Rear Spar Riveting
Today I will continue with riveting the doublers on both the vertical fin front spar and rear spar. Since I left off the other day having finished riveting the flush rivets. I then continued with the AN-470-4 rivets for the rest of the VS-808PP rear spar doubler. In the pictures below you’ll notice that I […]
Vertical Fin Rear Spar Doubler and Hinges
Today I’m continuing work on the VS-808PP rear spar doubler. I began with countersinking the holes near the bottom of the forward face of the doubler. The reason for this is because the forward side of the VS-803PP spar is dimpled where it mates to the fuselage. With the VS-803PP dimpled, the VS-808PP doubler needs to be […]