This evening I had a little time to countersink several holes in the rear side of the center forward spar. This area has flush rivets installed because a steel plate is eventually bolted to the HS forward spar in this area. The steel plate is used to attach the vertical stabilizer. I found a really good picture […]
Horizontal Stabilizer Dimpling
Tonight I was able to finish off the last of the priming for the HS. In the picture below you can see I have 2 different primers. I found a part can of one brand of primer and wanted to use it up, so some parts have ended up being a shade lighter. Then for the rest of the night […]
Horizontal Stabilizer Priming
Lots of prepping and priming tonight. Certainly not the most fun work to be done when building an airplane but it sure makes the parts look pretty! Here is what it looks like when I’m getting the parts prepped. I have a file to clean up any sharp edges, fine sandpaper to smooth out any […]
F1 Mod – Upsized rivets on forward and rear spars
Tonight I’m working on trying to finish off a few more modification details. One of which is to drill holes in the forward spar to accommodate a few 5/32 inch rivets on the HS-810-1 and HS-814-1 reinforcement angles. The diagram below shows the area of the reinforcing angles where the larger rivets go. Due to […]