In the last post we left off with getting the outboard ribs located (# 12 and 13) as shown below. Then I got the leading edge rib attach angle clamped in place. On the backside of the angle, I marked the edge distance and a centerline down the flange that is clamped against the spar. […]

The plan for today is to start assembling the skeleton of the right wing. That is to get all the ribs drilled to the spar. As seen on the picture below, there is a flange on the forward side of the ribs. This rib is later fastened attached to the spar with blind rivets. As […]