F1 Rocket Hangar

Speed...Speed and Looks...Looks and Speed!

  • The Airplane Builder
  • F1 Rocket Info
    • F1 Rocket Specs
    • F1 Rocket Build Tips
  • F1 Build Log
  • About
    • Disclosure
  • Stewart 51 Hangar
  • Resources
  • Ask Mike | Contact

F1 Mod – Elevator Tip and Counterbalance Skin Stiffener

May 13, 2016 by admin Leave a Comment

In this log entry I’m working on one of the F1 Rocket elevator mods to stiffen the elevator skins in the area of the counterbalance skin (E-713) and tip rib (E-703). See the diagram below to see the skin stiffener (red) and doubler (green). In the picture below, you can see that I start with a […]

Elevator balance weights and Riveting

April 11, 2016 by admin Leave a Comment

Tonight I had a bit of time to do some quick riveting on some elevator parts. I started with finishing the elevator trim motor cover plate by riveting on the Z-channels. Next I riveted right elevator E-703 and E-704 tip ribs together to form their assembly. I then moved on to riveting the E-709 rib […]

F1 Mod – Trim Motor Bracket and Trim Tab Spar Stiffener

April 2, 2016 by admin Leave a Comment

Tonight I was able to tackle a few little jobs on the left elevator. I started by working on the elevator trim motor support which is mounted on the trim cover plate (E-616PP). There are a few things to be careful of when doing this. I recommend that before doing this, you go and read a few […]

Right Elevator – Counterbalance and Input Horn

February 25, 2016 by admin Leave a Comment

Today I was working on the right elevator.  In particular I was fitting the WD-605-R-1 elevator horn and also working on the counterbalance area on the tip. With all the parts being pre-drilled this work is pretty self-explanatory. The only words of wisdom here are to use lots of clecos to hold everything nice and […]

« Previous Page
Next Page »
Profile Photo 1 Hello - My name is Mike and I'm a true believer that if you can imagine something, it's just a matter of bringing it into reality.

Categories

  • Empennage
    • Elevators
      • Left Elevator
        • Trim Tab
      • Right Elevator
    • Horizontal Stabilizer
    • Rudder
    • Vertical Fin
  • In My Travels
  • Primer
  • Tools
  • Uncategorized
  • Wings
    • Ailerons
    • F-404 Bulkhead
    • Flaps
    • Fuel Tanks
    • Leading Edge
    • Left Wing
    • Rear Wing Spar
    • Right Wing
  • Workshop

Tags

Ailerons Anti-Hang Up Guide Countersink Dimpling Doubler E-606-PP Elevator Empennage F-404 Bulkhead Flaps Fuel Sender Fuel Tank Hinge Horizontal Stabilizer HS-3101 HS-3201 Jigs Leading Edge Main Squeeze Mods Oshkosh priming rear spar Rib spacing Riveting Rudder Rudder Brace Horn Screw-ups Spar spreader bars Stiffener Tools Trap Door TrimTab Vertical Fin VS-001 VS-002 VS-803PP VS-808PP W-407B W-407C W-407D Wing Wings Workshop

Copyright © 2025 · Beautiful Pro Theme on Genesis Framework · WordPress · Log in