I recently received the replacement rudder skin for the one that I messed up a few weeks back, while riveting on the stiffener angles. While riveting this one, I made darn sure that the back riveting plate was under where I was riveting. Everything was going great, until I got to the trailing edge. I got […]
Rudder Spar Riveting
This evening I riveted the rudder hinge mounting brackets and reinforcing plates. One item of caution here is just to remember that you will be using longer rivets than are called for in the RV-8 plans. So make sure you check each rivet for the correct length before you start riveting. In the picture below […]
Rudder Stiffener Riveting
Today I started off by prepping the rudder frame parts for priming, and then of course, getting them primed. Pretty simple, nothing I haven’t covered elsewhere. While the parts were drying, I thought I would be productive and start riveting some stringers onto the rudder skin. The first few rivets set perfectly. And then…tragedy […]
Vertical Fin – Rear Spar Riveting
Today I will continue with riveting the doublers on both the vertical fin front spar and rear spar. Since I left off the other day having finished riveting the flush rivets. I then continued with the AN-470-4 rivets for the rest of the VS-808PP rear spar doubler. In the pictures below you’ll notice that I […]